Submersible pressure transducer PL301 Submersible level transmitter
Feature of PL301 Submersible level transmitter
● Wide range application
● Long service life
● Diffused silicon oil-filed sensor cell
● CE certificate
● Reinforcement cables optional
● Intrinsically sate ,explosion proof
Specifications of PL301 Submersible level transmitter
| ssure medium | liquid compatible stainless steel |
| pressure ranges | 0~1 m H2O...300 m H2O |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0.4 ~4.5V, 0~5V, RS485, RS232, 868 Mhz 4~20mA+Hart |
| accuracy | 0.1%FS,0.25%FS,0.5%FS (standard) |
| load resistance | RL = (U-10)/0.02(Ω) (4~20mA current output), ＞20KΩ (voltage output) |
| long term stability | 0.2%FS/year |
| supply voltage | 10~36VDC |
| compensated temperature range | -10~70°c |
| operating temperature range | -20~85°c |
| storage temperature range | -40~125°c |
| temperature coefficient of zero | ±0.015%FS/°c@25°c |
| temperature coefficient of span | ±0.02%FS/°c@25°c |
| insulation resistance | 100MΩ@ 250VDC 100MΩ@ 500VDC |
| Pressure connection | screw thread, throw-in type |
| Protection grade | IP68 |
| material of wetted part and housing | 304SS or 316L |
| material of pressure membrane | 316L |
| Response time | 1ms |
Applications PL301 Submersible level sensor
● Hydraulic monitoring
● Frequency water supply
● Liquid measuring for petroleum ,metallurgy
● City water supply
● Sewage treatment
● Tank level monitoringT
● Water-saving irrigation
● Circulation fluid monitoring
Description PL301 Submersible level transmitter
For corrosive media applications such as seawater or leachate,
especially in landfills, we offer advanced dual phase stainless
steel submersible level transmitters with extremely high corrosion
resistance.
Submersible level sensor with 304 stainless steel housing and
waterproof cable, can be directly into the water/oil/tank or
reservoir for level measurement. Measuring range :0 to 1m, 0 to 3m,
0 to 5m, 0 to 10m, 0 to 500m. The accuracy of the liquid level
sensor is 0.5%FS or 0.3%FS. Output signal 4-20mA/0-5V/RS485, power
supply 24V/12V. Cable type and connection type are also
customizable.
Submersible level sensor is essentially a pressure sensor used to
measure liquid level. According to the principle that the static
pressure of the liquid under test is proportional to the height of
the liquid, the static pressure is converted into electrical signal
by the isolated diffusion silicon sensor or ceramic capacitive
pressure sensor. The signal after temperature compensation and the
linear correction is converted into a standard signal. Submersible
level sensor is generally used in petrochemical, metallurgy,
electric power, pharmaceutical, water supply and drainage,
environmental protection and other media liquid level measurement.
The submersible level sensor essentially is a pressure transducer
that measures the liquid level. Based on the principle that the
static pressure of the measured liquid is proportional to the
height of the liquid, it uses an isolated diffused silicon
sensitive element or a ceramic capacitive pressure sensitive sensor
to convert the static pressure into the electrical signal. The
electrical signal is converted into a standard electrical signal
after temperature compensation and linear correction. Submersible
level sensor is generally suitable for liquid level measurement of
various media in petrochemical, metallurgy, electric power,
pharmaceutical, water supply and drainage and environmental
protection.
The submersible hydrostatic level transmitter PL301 has been
designed for continuous liquid level monitoring in water wells,
reservoirs, tanks, boreholes, rivers and other liquids.
The submersible unit measures the static pressure of the liquid
column above the transmitter and transmits a current signal
proportional to the water column to the instrumentation above.
The highly stable 316L stainless steel diaphragm sensor is fully
compatible to raw or chlorinated water and most semi-aggressive
liquids.
Supplied with a special vented cable to compensate the atmospheric
pressure changes, it accurately transmits the measured liquid
level. The application-dependent cable length can be defined at the
time of purchase to the desired extent and can also be customer
adapted at the application site.
The submersible hydrostatic level transmitter PL301 has been
designed for continuous liquid level monitoring in water wells,
reservoirs, tanks, boreholes, rivers and other liquids.
